ZyXEL Communications P-335WT - Manual (Page 250)

P-335 Series User’s Guide
250 Chapter 19 Print Server
The print server must be set up on each computer in your network that you want to use the
print server. Before you set up the print server, make sure the USB printer is connected to the
Prestige using the USB cable and that both the Prestige and the USB printer are turned on.
19.3 Prestige Print Server Configuration
From the MAIN MENU click Print Server to display the screen shown next.
Figure 112 Configuring Print Server Screen
Table 81 Configuring Print Server
LABEL DESCRIPTION
Print Device Name Type a Print Device Name for recognition of the associated printer on the print
server network.
This name is displayed on a computer on the print server network when a print
job is executed.
Print Model Name This displays the model name of the printer currently associated to the
Prestige print server.
Print Port Status This field displays the print server status on the Prestige
Ready: The print server has established a TCP/IP connection with a printer, is
online and ready to print.
Printing: A computer on the print server network is executed a print job.
PaperOut: The printer loading tray has no paper to perform the printing job
Offline: The computers in the print server network cannot use the print server.
See the Appendix for troubleshooting the Print Port Status.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to configure the Print Device Name afresh.