ZyXEL Communications P-335WT - Manual (Page 48)

P-335 Series User’s Guide
48 Chapter 1 Getting to Know Your Prestige
1.2.2.24 DHCP (Dynamic Host Configuration Protocol)
DHCP (Dynamic Host Configuration Protocol) allows the individual client computers to
obtain the TCP/IP configuration at start-up from a centralized DHCP server. The Prestige has
built-in DHCP server capability, enabled by default, which means it can assign IP addresses,
an IP default gateway and DNS servers to all systems that support the DHCP client.
1.2.2.25 Any IP
The Any IP feature allows a computer to access the Internet without changing the network
settings (such as IP address and subnet mask) of the computer, when the IP addresses of the
computer and the Prestige are not in the same subnet.
1.2.2.26 Full Network Management
The embedded web configurator is an all-platform web-based utility that allows you to easily
access the Prestige’s management settings and configure the firewall. Most functions of the
Prestige are also software configurable via the SMT (System Management Terminal)
interface. The SMT is a menu-driven interface that you can access over a telnet connection.
1.2.2.27 RoadRunner Support
In addition to standard cable modem services, the Prestige supports Time Warner’s
RoadRunner Service.
1.2.2.28 Logging and Tracing
• Built-in message logging and packet tracing.
• Unix syslog facility support.
• Firewall logs.
• Content filtering logs.
1.2.2.29 Upgrade Prestige Firmware via LAN
The firmware of the Prestige can be upgraded via the LAN (refer to Maintenance- F/W Upload
Screen).
1.2.2.30 Embedded FTP and TFTP Servers
The Prestige’s embedded FTP and TFTP Servers enable fast firmware upgrades as well as
configuration file backups and restoration.
1.2.2.31 Wireless Association List (P-335WT only)
With the Wireless Association List, you can see the list of the wireless stations that are
currently using the Prestige to access your wired network.