ZyXEL Communications P-335WT - Manual (Page 201)

P-335 Series User’s Guide
Chapter 15 Remote Management Screens 201
15.5 Configuring FTP
You can upload and download the Prestige’s firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance for details. To use this
feature, your computer must have an FTP client.
To change your Prestige’s FTP settings, click REMOTE MGMT, then the FTP tab. The
screen appears as shown.
Figure 89 Remote Management: FTP
The following table describes the labels in this screen.
Table 62 Remote Management: FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the Prestige using
this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 61 Remote Management: Telnet
LABEL DESCRIPTION