ZyXEL Communications P-335WT - Manual (Page 73)

P-335 Series User’s Guide
Chapter 3 Wizard Setup 73
Select Get automatically from ISP (Default) in the first WAN wizard setup screen and click
Next to view the following WAN MAC Address screen. Click Next to go to the final wizard
setup screen.
Figure 17 Wizard Setup : WAN MAC Address
The following table describes the labels in this screen
Table 15 Wizard Setup : WAN MAC Address
LABEL DESCRIPTION
WAN MAC Address The MAC address field allows you to configure the WAN port's MAC
Address by either using the factory default or cloning the MAC address
from a computer on your LAN.
Factory Default Select this option to use the factory assigned default MAC Address.
Spoof this Computer's
MAC address - IP Address
Select this option and enter the IP address of the computer on the LAN
whose MAC you are cloning. Once it is successfully configured, the
address will be copied to the rom file (ZyNOS configuration file). It will not
change unless you change the setting or upload a different rom file. It is
advisable to clone the MAC address from a computer on your LAN even if
your ISP does not presently require MAC address authentication.
Back Click Back to return to the previous screen.
Next Click Next to continue.
3.7 Wizard Setup : Complete
Follow the on-screen instructions and click Finish to complete the wizard setup and save your
configuration.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Table 14 Wizard Setup : WAN IP and DNS Server Address Assignment
LABEL DESCRIPTION