Texas Instruments TMS320TCI648x - Manual (Page 224)

www.ti.com
5.85 Port n Error Capture CSR 1 (SPn_ERR_CAPT_DBG1)
SRIO Registers
Each of the four ports is supported by a register of this type (see Table 164 ). SPn_ERR_CAPT_DBG1 is
shown in Figure 148 and described in Table 165 .
Table 164. SPn_ERR_CAPT_DBG1 Registers and the Associated Ports
Register Address Offset Associated Port
SP0_ERR_CAPT_DBG1 204Ch Port 0
SP1_ERR_CAPT_DBG1 208Ch Port 1
SP2_ERR_CAPT_DBG1 20CCh Port 2
SP3_ERR_CAPT_DBG1 210Ch Port 3
Figure 148. Port n Error Capture CSR 1 (SPn_ERR_CAPT_DBG1)
31 0
CAPTURE0
R-00000000h
LEGEND: R = Read only; -n = Value after reset
Table 165. Port n Error Capture CSR 1 (SPn_ERR_CAPT_DBG1) Field Descriptions
Bit Field Value Description
31–0 CAPTURE0 00000000h In the case of a control-symbol error:
to Control character and control symbol that correspond to the error
FFFFFFFFh
In the case of a packet error:
Bytes 0 to 3 of the packet header that corresponds to the error
Serial RapidIO (SRIO) 224 SPRUE13A – September 2006
Submit Documentation Feedback