Section 5.76 – Texas Instruments TMS320TCI648x User Manual
Page 212
www.ti.com
5.76 Logical/Transport Layer Error Enable CSR (ERR_EN)
SRIO Registers
The logical/transport layer error enable CSR (ERR_EN) is shown in
and described in
Figure 139. Logical/Transport Layer Error Enable CSR (ERR_EN) - Address Offset 200Ch
31
30
29
28
27
26
25
24
IO_ERR_
MSG_ERR_
Reserved
ERR_MSG_
ILL_TRANS_
Reserved
MSG_REQ_
PKT_RESP_
RESP_
RESP_
(write 0)
FORMAT_
DECODE_
(write 0)
TIMEOUT_
TIMEOUT_
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
23
22
21
UNSOLICITED_
UNSUPPORTED_
Reserved
RESP_ENABLE
TRANS_ENABLE
R/W-0
R/W-0
R-0
8
Reserved
R-0
7
6
5
0
RX_CPPI_
RX_IO_
Reserved
SECURITY_
SECURITY_
ENABLE
ENABLE
R/W-0
R/W-0
R-0
LEGEND: R/W = Read/Write; R = Read only; -n = Value after reset
Table 152. Logical/Transport Layer Error Enable CSR (ERR_EN) Field Descriptions
Bit
Field
Value
Description
31
IO_ERR_RESP_ENABLE
IO error response reporting enable
0
Disable reporting of an IO error response.
1
Enable reporting of an IO error response (endpoint device only).
Save and lock original request transaction capture information in all
Logical/Transport Layer Capture CSRs.
30
MSG_ERR_RESP_ENABLE
Message error response reporting enable
0
Disable reporting of a message error response.
1
Enable reporting of a message error response (endpoint device
only). Save and lock transaction capture information in all
Logical/Transport Layer Capture CSRs.
29
Reserved
0
Always write 0 to this reserved bit.
28
ERR_MSG_FORMAT_ENABLE
Message format error reporting enable
0
Disable reporting of a message format error.
1
Enable reporting of a message format error (endpoint device only).
Save and lock transaction capture information in Logical/Transport
Layer Device ID and Control Capture CSRs.
27
ILL_TRANS_DECODE_ENABLE
Illegal transaction decode error reporting enable
0
Disable reporting of an illegal transaction decode error.
1
Enable reporting of an illegal transaction decode error (switch or
endpoint device). Save and lock transaction capture information in
Logical/Transport Layer Device ID and Control Capture CSRs.
26
Reserved
0
Always write 0 to this reserved bit.
25
MSG_REQ_TIMEOUT_ENABLE
Message request time-out error reporting enable
0
Disable reporting of a message request time-out error.
1
Enable reporting of a message request time-out error (endpoint
device only). Save and lock transaction capture information in
Logical/Transport Layer Device ID and Control Capture CSRs for the
last message-segment request packet received.
212
Serial RapidIO (SRIO)
SPRUE13A – September 2006