10 rapidio deviceid2 register (deviceid_reg2), Deviceid_reg2), Section 5.10 – Texas Instruments TMS320TCI648x User Manual
Page 122

www.ti.com
5.10 RapidIO DEVICEID2 Register (DEVICEID_REG2)
SRIO Registers
The RapidIO DEVICEID2 register (DEVICEID_REG2 is shown in
and described in
. For
additional programming information, see
and
Figure 71. RapidIO DEVICEID2 Register (DEVICEID_REG2) (Offset 0x0084)
31
24 23
16
Reserved
8BNODEID
R-00h
R/W-FFh
15
0
16BNODEID
R-FFFFh
LEGEND: R/W = Read/Write; R = Read only; -n = Value after reset
Table 51. RapidIO DEVICEID2 Register (DEVICEID_REG2) Field Descriptions
Bit
Field
Value
Description
31–24
Reserved
0
Reserved
23–16
8BNODEID
00h–FFh
This is a secondary supported DeviceID checked against an incoming packet's DestID
field. Typically used for Multi-cast support.
15–0
16BNODEID
0000h–FFFFh
This is a secondary supported DeviceID checked against an incoming packet's DestID
field. Typically used for Multi-cast support.
Serial RapidIO (SRIO)
122
SPRUE13A – September 2006