Nortel Networks 6.1 - Manual (Page 90)

90 / Auto Attendant
Compact ICS 6.1 System Coordinator Guide P0603544 02
If CCR is programmed to answer the call in less than two rings, the call
information may not be captured and forwarded to telephones in the CCR
group.
Adding/removing telephones from CCR
groups
The greeting you create for CCR tells a caller to press a number to reach a
group of telephones. You add or remove telephones from these groups
(CCR groups) in programming.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press “ twice.
4. Press ≠, ‘, and ≠.
5. Press ‘ three times. The display shows CCRˆ.
6. Press ≠.
7. Press ‘. The display shows CCR groupsˆ.
8. Press ≠ and enter the number of the group to which you want
to make changes.
9. Press ≠ and enter the internal number of the telephone you
want to add or remove from the group.
10. Press CHANGE to select the status of the telephone in the group:
Assigned, Unassgnd.
You can have a total of nine CCR groups. Each group can include up to 20
telephones.