Nortel Networks 6.1 - Manual (Page 130)

130 / Communicating in the office
Compact ICS 6.1 System Coordinator Guide P0603544 02
Activating and deactivating the ability to page
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press ≠ and enter the internal number of the telephone you
want to program.
4. Press ≠ twice.
5. Press ‘ seven times. The display shows Paging.
6. Press CHANGE to select the setting: Y (Yes) or N (No).
Creating page zones
Each telephone can be assigned to one of three zones for receiving pages.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press ≠ and enter the internal number of the telephone you
want to program.
4. Press ≠ twice.
5. Press ‘ six times. The display shows Page Zone.
6. Press CHANGE to select the setting: 1, 2, 3, or None.
You can make a telephone part of a page zone only if the telephone has
paging set to Y (Yes).
Tip - Hunt Group DNs cannot be included in a page
zone. For more information about Hunt Groups, see
‘‘Programming Hunt Groups’’ on page 171.