Nortel Networks 6.1 - Manual (Page 185)

P0603544 02 Compact ICS 6.1 System Coordinator Guide
Using the Hospitality features
This section describes the Hospitality Services feature which is used to
administer room and alarm services in small to medium-sized facilities
such as hotels, motels, or hospitals.
There are three types of sets that make up this type of system:
Common set—this telephone can be found in the lobby, office, or common
area, and is not associated with a room. This type of telephone is used for
public access, and cannot access the admin or room features.
Room set—this telephone resides in a specific room and can be used by
both guests and cleaning staff to set alarms or to indicate room condition.
Up to five telephones can be assigned to the same room number, such as
for fax lines, internet dial-up, etc.
Administration set—this telephone must be a two-line display telephone
and is usually configured with a password to allow secure administration
of room occupancy and condition services and alarm services.
Hospitality passwords
There are two passwords within the hospitality feature. One provides
secure access to the administration set, and one provides secure access to a
room condition setting from each room set for housekeeping staff.
Desk pswd
Change this password frequently, to maintain security.
1. Place the appropriate programming overlay on the set you are using to
do programming.
2. Press
²¥¥ЫЯЯЬЭЭ (CONFIG). The display shows
Password:.
3. Press
ЫЬЯЭЯ (ADMIN). The display shows
Terminals&Sets.