Nortel Networks 6.1 - Manual (Page 61)

Answering calls / 61
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Creating a Conference Call
You can talk to two people at once.
1. Make sure you have two calls, one active and one on hold.
2. Press
²Ü
.
3. Press the appropriate button to retrieve the held call (this is automatic
on the M7100 and T7100 telephones).
You can create a conference when you are on a call.
1. Make a second call.
2. Press
²Ü
.
3. Press the button where the first call is on hold to create a conference.
Only the person who established the conference can process the conference
by using the procedures described in this section.
Disconnecting one party
You can disconnect one party from a conference and continue talking to the
other.
On the telephone you are using for system programming:
1. Press the line button of the call that you want to disconnect. The call
that you want to keep is automatically put on hold.
2. Press
¨
. The call is disconnected.
3. Press the line button of the held call to speak to the remaining person.
Tip - You can create a conference by releasing privacy
on a call. See ‘‘Turning Privacy on or off for a call’’ on
page 70.