Nortel Networks 6.1 - Manual (Page 226)

226 / Using System features
Compact ICS 6.1 System Coordinator Guide P0603544 02
Changing passwords
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press ‘ four times. Passwords displays.
4. Press ≠. Call Log pswds displays.
5. Press ‘ until you see Progrming pswds ˆ.
6. Press ≠. Sys Admin: displays.
7. Press ‘ until you see the name of the password you want to
change.
8. Use ≠, CHANGE and the dialpad to enter the new password.
Press OK to accept the new password.
You cannot erase or eliminate the ability to program passwords.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear it in
programming. The individual can then enter a new password from his or
her telephone.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press ‘ four times. Passwords displays.
4. Press ≠. Call Log pswds displays.
5. Press ‘ until the display shows Call log pswds.
6. Press ≠ and enter the internal telephone number of the
telephone where you want to clear the Call Log password.
7. Press ≠, then press CLR to clear the password.