Nortel Networks 6.1 - Manual (Page 186)

186 / Using the Hospitality features
Compact ICS 6.1 System Coordinator Guide P0603544 02
4. Press ‘ until the display shows Hospitality.
5. Press ≠. Desk pswd: displays. (default is 4677)
6. Press CHANGE. New pswd: displays
7. Enter a new password, then press OK.
Cond pswd
Change this password frequently, to maintain security.
1. Place the appropriate programming overlay on the set you are using to
do programming.
2. Press
²¥¥ЫЯЯЬЭЭ (CONFIG). The display shows
Password:.
3. Press
ЫЬЯЭЯ (ADMIN). The display shows
Terminals&Sets.
4. Press ‘ until the display shows Hospitality.
5. Press ≠.
6. Press ‘. Cond pswd:None displays.
7. Press CHANGE. New pswd: displays
8. Enter a new password, then press OK.
Room/desk information
There are two aspects to programming room information.
• First you must program specific DNs to a specific room and set up the
room occupancy filters, which determine what types of calls can be
made from a room set at various states of occupancy.
Note: You can assign up to five DNs to the same room number.
• Then you need to administer the room occupancy and state of the
room.