Nortel Networks 6.1 - Manual (Page 166)

166 / User Preferences
Compact ICS 6.1 System Coordinator Guide P0603544 02
User Preferences programming is available under User Preferences
under the heading Terminals&Sets.
Sub-headings in User Preferences
Changing button programming
Press ≠ at Button prgrming. The display shows the number of
buttons on the telephone (an example is shown in Displays at the end of this
section).
If the telephone has a CAP module, you can press CAP1 or KIM1 to see the
buttons on the module.
Press ‘ to move through all the buttons on the telephone. Refer
to ‘‘Default button assignments’’ on page 161 for button number mapping
for each type of Business Series Terminal and Norstar M-series telephones.
Use the display buttons to change the programming for a button. User
Preferences programming cannot change the buttons that are used by lines,
intercom, and the handsfree feature, which are assigned by the system
administrator. Refer to the Compact ICS 6.1 Installer Guide for details.
The display buttons used in button programming
User prefernces
Model
Button prgrming
User speed dial
Call log opt’ns
Dialing opt’ns
Language
Display cntrst
Ring type
CANCL Moves you out of a setting without making any changes to it.
CLR Erases the button.
TEL# Programs the key as an autodial number for an internal or an
external number. If it is an external autodial number, you have to
choose a line, line pool, or the routing table for the call to use.