Nortel Networks 6.1 - Manual (Page 48)

48 / Answering calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Using a CAP module
A central answering position that uses a Norstar M7324 telephone and a
CAP module is programmed as a CAP by your installer or customer service
representative. It is best if the CAP is the prime telephone and direct-dial
telephone for the lines and telephones it serves.
M7324 set with one CAP module
A CAP module is an add-on device that provides 48 extra memory or line
buttons. You can connect one Norstar CAP module to the telephone to
increase the number of lines it can handle.
When a CAP module is first plugged into your telephone, some of the
module buttons are already programmed to dial an internal number.
Customizing your CAP module
If your installer has programmed the CAP module to be the central
answering position for your system, you can move external lines onto the
CAP module by using
²¥¡Ú
. See ‘‘Moving line buttons’’ on
page 162.
Any of the buttons on your CAP module that do not select lines can be
programmed to dial internal or external numbers automatically. You can
program features onto CAP module buttons. See ‘‘Storing a number on a
memory button for Autodial’’ on page 97 and ‘‘Customizing your
telephone’’ on page 147 for information on programming memory buttons.
M7324 telephone
CAP module