Nortel Networks 6.1 - Manual (Page 232)

232 / Using System features
Compact ICS 6.1 System Coordinator Guide P0603544 02
6. Press ≠ twice.
7. Use CHANGE to select one of the three options: None, Partial and
Full.
Using an auxiliary ringer
An auxiliary ringer is a separate device that has to be connected to Norstar.
Refer to the section on installing optional equipment in the Compact ICS
6.1 Installer Guide.
Turning the auxiliary ringer for a telephone on or
off
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press ≠ at Terminals&Sets.
4. Enter the internal number of the telephone you want to program and
press ≠. The display shows Capabilities.
5. Press ≠.
6. Press ‘ until the display shows Aux. ringer.
7. Use CHANGE to select Y (Yes) or N (No).
Your installer or customer service representative can program the auxiliary
ringer to start ringing for incoming lines as part of Ringing Service.