Nortel Networks 6.1 - Manual (Page 21)

Getting started with Norstar / 21
P0603544 02 Compact ICS 6.1 System Coordinator Guide
The programming overlay
When you begin programming, a group of buttons on the
telephone become the buttons for moving through programming
headings and settings. The programming overlay is a paper
cutout that is included with the Programming record. It relabels
the four buttons to name the actions you use during
programming. If you lose the overlay, there is an extra overlay
included in the back of this book that can be printed and cut out.
The diagram below shows how the headings are used to navigate
the programming menus.
Programming buttons are active or inactive at different stages of
programming. A button is active (meaning you can use that
option), when the indicator next to it is lit (ª or º).
Press Show to move to the next
level under the current heading.
Press Next to
move to the next
item on the same
menu level.
Press Heading to move up
one level of the menu structure
Press Back to move
to the previous item
on the same menu
level.
Auto Attendant
BusName
Hunt groups
System Prgrming
Attd set:
Current heading