Nortel Networks 6.1 - Manual (Page 215)

ISDN / 215
P0603544 02 Compact ICS 6.1 System Coordinator Guide
MCID prompts
Network Call Diversion (profile 2)
This feature is a network function that allows forwarding and redirection of
calls outside the Norstar network when using an ETSI ISDN line.
Functionality is similar to that of External Call Forward (ECF). NCD
redirects calls using the same line on which they arrive. Call forward is
efficient since there is no need for additional outside lines.
ISDN BRI terminals
Your Compact ICS supports up to eight Basic Rate Access loops (four
2B+D channels) that can be used for fully digital connections to ISDN
networks and devices. Loops are connections between the ICS and devices
or between the ICS and the network.
Each loop provides two separate B-channels that can be used to make two
simultaneous voice or data calls, or one data call and one voice call.
The MCID request was accepted by the network.
No response to the MCID request.
MCID can only be invoked on received calls.
The caller information is not available. The CO is
not able to log the information or it is not an ETSI
BRI type of call.
MCID feature is not subscribed to.
MCID is not allowed in the current state of the
call.
Invalid interaction with another supplementary
service.
Call traced
No response
Not incoming
Not available
Not subscribed
Invalid state
Not allowed