Nortel Networks 6.1 - Manual (Page 66)

66 / Answering calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Making calls without lifting the handset
1. Press the handsfree button.
If you do not have a prime line assigned to your telephone, press a line
button. The internal microphone and speaker are automatically turned
on.
Note: The T7316E telephone has a handsfree button located below the
dialpad. This button only works if the telephone is wired to a system
running version 6.1 or newer software and the Handsfree setting in
programming is set to Auto.
2. Dial your call.
3. Speak normally.
Muting handsfree
1. Press the handsfree/mute button to switch off the telephone
microphone so that you can speak privately to someone in your office
while you are on a handsfree call.
2. Press the handsfree/mute button to turn the microphone back on again
and continue your handsfree call.
Note: The T7316 and T7316E telephones have a mute button located
below the dialpad. Refer to the user card for the telephones for
specifics about using this button.
Changing a regular call to handsfree
1. Press the handsfree button.
Note: The T7316E telephone has a handsfree button located below the
dialpad. This button only works if the telephone is wired to a system
running version 6.1 or newer software.
2. Hang up the handset.
Changing a handsfree to a regular call
Lift the handset.