Nortel Networks 6.1 - Manual (Page 50)

50 / Answering calls
Compact ICS 6.1 System Coordinator Guide P0603544 02
Norstar T7316E telephone with added KIM
An ordinary KIM (OKIM) configuration does not have any system
programming. At each telephone you can use the memory programming
feature to:
• provide feature access (Refer to ‘‘Programming a feature code onto a
memory button’’ on page 149 )
• provide access to line pools (Refer to ‘‘Programming a memory button
with a line pool feature code’’ on page 76)
• provide one-press external autodial (Refer to ‘‘Storing a number on a
memory button for Autodial’’ on page 97)
• configure system-wide call appearances (SWCA) by assigning SWCA
feature codes
An extended KIM (eKIM) provides the same functionality as the OKIM
plus the ability to support multiple target line assignments and Hunt group
appearances. A T7316E can support a maximum of four eKIMs. Your
system can support one CAP. Note that this total includes any T7324
CAPs.