Nortel Networks 6.1 - Manual (Page 190)

190 / Using the Hospitality features
Compact ICS 6.1 System Coordinator Guide P0603544 02
Programming the alarm feature
If you want to allow the room sets to program wake-up alarms, there are a
couple of program settings that need to be entered.
1. Place the appropriate programming overlay on the set you are using to
do programming.
2. Press
²¥¥ЫЯЯЬЭЭ (CONFIG). The display shows
Password:.
3. Press
ЫЬЯЭЯ (ADMIN). The display shows
Terminals&Sets.
4. Press ‘ until the display shows Hospitality.
5. Press ≠. Room/desk info displays.
6. Press ≠ until Alarm displays.
7. Press ≠. Attn attempts:3 displays.
8. Press CHANGE until you find the number you want (1-5).
9. Press ‘. Retry intrvl:4 displays.
10. Press CHANGE until you find the number you want (2, 4, 6, or 8).
11. Press ‘. Attn duration: 15 displays.
12. Press CHANGE until you find the number of seconds you want (10, 15,
20, 30, 40, 50).
13. Press ‘. Time format:12 hr displays.
14. Press CHANGE to choose either 12hr or 24hr.
15. Press ‘. Expired alarms displays.
16. Press ≠. Notify set:None displays.
17. Press CHANGE to enter a set DN to be notified.
18. Press ‘. Use tone: N displays.
19. Press CHANGE to choose either Y (yes) or N (no).
20. Press
¨ to exit or ‘ to continue programming.