Nortel Networks 6.1 - Manual (Page 103)

Auto Attendant / 103
P0603544 02 Compact ICS 6.1 System Coordinator Guide
Using Saved Number Redial
²ßà
You can save the number of the external call you are on (provided you
dialed the call) so that you can call it again later. Each telephone can save
one number at a time with Saved Number Redial, not one number for each
line.
Saving a number
Press
²ßà while you are on the call.
Saved Number Redial records a maximum of 24 digits.
Dialing a saved number
Press
²ßà when you are not on a call.
If you have a programmed Saved Number Redial button, you can use
Button Inquiry (
²¥â) to check the last number before you dial it.
Preventing a telephone from using Saved
Number Redial
Saved Number Redial can be restricted at individual telephones.
You need the programming template found at the front of this guide. See
‘‘Getting started with Norstar’’ on page 15 for more information.
1. Press
²¥¥ЫЯЯЬЭЭ.
2. Press
ЫЬЯЭЯ (the default System Coordinator password).
3. Press ≠ and enter the internal number of the telephone you
want to program.
Tip -
You can copy a number onto an autodial button
using Saved Number Redial.