Panasonic MN103001G/F01K User Manual
Page 330
![background image](/manuals/188547/330/background.png)
Serial Interface
13-28
Bit No.
Bit name
Description
8
SCnTOE
SBTn pin output control
0: When the internal clock is selected, the SBTn pin is an output only while
transmission is in progress (the SBTn pin is an input when in standby
mode or when an external clock is selected)
1: When the internal clock is selected, the SBTn pin is always an output
(the SBTn pin is an input when an external clock is selected)
9
SCnOD
Transmission and reception bit sequence selection
0: From LSB
1: From MSB
10
SCnMD0
Protocol selection
0: Clock synchronous mode (1) (the SBOn pin is used as a data output, and
the SBIn pin is used as a data input)
1: Clock synchronous mode (2) (the SBOn pin is used as a data input and
output, and input on the SBIn pin is ignored)
13 to 11
—
"0" is returned when these bits are read.
14
SCnRXE
Reception operation enable
0: Disabled
1: Enabled
15
SCnTXE
Transmission operation enable
0: Disabled
1: Enabled