Printronix P5000LJ Series - Manual (Page 78)

78
Chapter 4 Config. Control Menu
Save Config.
This option allows you to save up to eight unique configurations to meet
different print job requirements, which eliminates the need to change the
parameter settings for each new job.
The configurations are stored in memory. They will not be lost if you turn off
the printer. Configuration 0 is a factory-preset configuration, which cannot be
changed or saved. See page 56 for a detailed description and sample
procedure.
Print Config.
Allows you to print a listing of stored printer configurations. It is recommended
you store the configurations in a safe place for quick referral, such as inside
the printer, if you have a cabinet model. See page 58 for a detailed
description and sample procedure.
Delete Config.
Allows you to delete one or all of your eight customized configurations.
Configuration 0 is a factory-preset configuration and cannot be changed or
deleted.
Power-Up Config.
Allows you to specify which of the nine configurations (0-8) will be the power-
up configuration. The factory default for power-up is configuration 0. See page
62 for a detailed description and sample procedure.
Protect Configs.
Allows you to specify whether or not a new configuration should overwrite an
existing configuration when you activate the Save Config. parameter.
• Disable. The default. The new configuration will overwrite the existing
configuration.
• Enable. The new configuration will not overwrite the existing
configuration, and the message “CONFIG. EXISTS / Delete First”
displays. You must delete the existing configuration (1-8) before trying to
save the new configuration.
Note If the Protect Configs. parameter is enabled, the new configuration will not
be saved unless the existing configuration has been deleted.