Printronix P5000LJ Series - Manual (Page 228)

228
Chapter 12 Novell NIC Configuration (10/100Base-T)
Setting The Print Server Preferred NDS Tree (NDS)
The NIC supports Novell environments that have multiple trees. If your
environment has more than one tree, you may want to set a preferred tree. By
default, the NIC will try to log in to each tree it finds until it is successful.
HTML Method
1. Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
2. Direct your Web browser to URL:
http://P5000LJIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html )
3. Look under the “Novell” section and enter the preferred tree in the “NDS
Preferred Tree” field.
4. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet ipaddress
2. You should now see a prompt displayed that has the NIC’s IP address
followed by a colon then
root .
ipaddress:root>
3. At the prompt, enter:
store pserver novell tree tree
4. Reset the unit to make the changes take effect.
reset
Note If prompted for a User ID and password first, type in root for the ID and
press ENTER at the password prompt since there is no password by
default.
Note If prompted for a User ID and password first, type in root for the ID and
press ENTER at the password prompt since there is no password by
default.