Printronix P5000LJ Series User Manual
Page 245
Store Commands
245
store pserver tcpsocket TCPportnumber dest destination
store pserver tcpsocket 5000 dest d1prn
Assign a pre-defined
TCPportnumber
to a particular
destination
on
the NIC. Therefore, if you are using a print method that sends jobs directly
to a TCP port number, you still have the option to process the job data
through this destination setting.
store pserver novell passwd password
store pserver novell passwd mplex
Store the
password
for the NIC to use when logging in to a Novell file
server. This
password
would have to match one set on the file server.
store pserver novell user name username
store pserver novell user name micro1
Define a
username
on the NIC to be used when it logs in to a Novell file
server to find information. This
username
must match a user pre-defined
on the Novell file server.
store pserver novell user passwd password
store pserver novell user passwd mplex2
Define a
password
on the NIC for the Novell user already defined. This
password
must match the one stored on the Novell file server.
Passwords are optional as long as there is not one defined on the file
server for the user.
store pserver novell fserver add|del fileservername
store pserver novell fserver add fs1
Add or remove a server entry on the NIC for the Novell file server it will be
servicing.
store pserver smb workgrp newworkgroupname
store pserver smb workgrp eng
Define a different Windows workgroup as defined by
newworkgroupname
for the NIC to be visible within. By default, the print
server only comes up within the group called “WORKGROUP.”
store pserver from default
Set all general print server settings back to factory defaults.
store pserver from current
Store all current general print server settings to flash memory so they are
retained after a power cycle. This ensures all current settings match what
is stored in flash memory.
store rprinter add|del printservername printernumber
destination
store rprinter add pserver1 0 d1prn
Add or delete the RPRINTER settings on the NIC for a Novell
environment. The
printservername
must be the name of an existing
PSERVER.NLM on your Novell file server. The
printernumber
is the
printer number within this PSERVER.NLM. The
destination
is the
queue on the NIC where the print jobs will be sent to.
store tcpip ifnum addr IPaddress
store tcpip 1 addr 192.75.11.9