Power stacker, Host interface menu – Printronix P5000LJ Series User Manual
Page 115
IGP/VGL (Code V) Emulation
115
Power Stacker
This parameter, which is only presented with the 1500QS model, allows you
to enable (the default) or disable power stacker operation.
Host Interface Menu
The Host Interface Menu Diagram enables you to select and configure an
interface between the printer and your host computer:
•
Bi-Tronics (factory default)
•
Serial
•
Centronics
•
Ethernet
•
Auto Switching
Note
When running short print jobs with the power stacker enabled, it
automatically moves to the top position.
Note
When you press the Online button, the stacker automatically moves down
one inch. When you press the Offline button, the stacker moves up
approximately one inch. When printing a batch file, the user must press the
stacker down until the lower limit is reached.
HOST
INTERFACE
Bi-Tronics*
Centronics
Serial
(see page 116) (see page 117) (see page 119)
Ethernet
Auto
Switching