Printronix P5000LJ Series - Manual (Page 178)

178
Chapter 9 Windows NIC Configuration
4. Click SUBMIT button when done and physically repower the print server
to make the new settings take effect.
Changing Destination Names
When defining some printers within Windows environments, the NIC requires
that you specify a pre-defined destination rather than any name you would
like. For example, when creating a new printer under Windows NT, you are
presented with a screen similar to Figure 16.
Figure 16. Windows NT Print Setup Dialogue Box
The first field requires the IP address for the NIC and the second field must be
filled in with a valid destination from the print server (e.g., d1prn). Otherwise,
LPR will not be able to access the printer. Table 15 outlines the default
destinations to choose from.
This name can be changed to something more meaningful using the built-in
HTML forms. To do this:
1. Load a Web browser on your Windows station and direct it to the URL
http://P5000LJIPaddress/destConf.html
(e.g., http://192.75.11.9/destConf.html )
Table 15. NIC Default Destinations
Destination Mapped I/O Port
d1prn PRN
d2prn PRN
d3prn PRN
d4prn PRN
Note If prompted for a User ID and password first, type in root for the ID and
press ENTER at the password prompt since there is no password by
default.