Printronix P5000LJ Series - Manual (Page 250)

250
Chapter 13 Complete Command List
set model model trailer trailerstring
set model m7 trailer $FF
Set a trailer string to be sent to the printer at the end of any print jobs
passing through this
model . trailerstring can consist of up to nine
elements. An example element is a hexadecimal code (e.g., 0x04) or a
pre-defined variable on the print server (e.g., $FF for a formfeed). Use
list var to see all available variables.
set model from default
Set all model settings back to factory defaults.
set model from stored
Set all current model settings to the values stored in flash memory.
set prn [-]autofd
set prn -autofd
Assert or do not assert the AUTOFD line for carriage return insertion. This
only affects printers that support this function (e.g., impact printers).
set prn flush
set prn flush
Flush the data in the parallel port input and output buffers.
set prn unlock
set prn unlock
Release the access lock on the parallel port.
set prn timeout minutes |none
set prn timeout none
Terminate the print job sent to the parallel port if it is not printed after the
timeout period in
minutes expires. The minutes value ranges from 0
though 255 with 0 indicating no timing out to take place. This is the default
setting and should be fine for most print setups.
set prn [-]opost
set prn -opost
Allow or disallow output processing on the parallel port such as carriage
return insertion (i.e.,
onlcr ).
set prn [-]onlcr
set prn -onlcr
Enable or disable carriage return insertion on the parallel port. This may
be needed for Unix text jobs coming through with solitary linefeeds. This
feature is almost always set at the model level rather than the I/O port
level though.
set prn xtab tablength |none
set prn xtab none
Set the tabstop width as indicated by tablength . The range is 1 through
16 spaces.
set prn from default
Set all parallel port settings back to factory defaults.
set prn from stored
Set all current parallel port settings to the values stored in flash memory.