Printronix P5000LJ Series - Manual (Page 106)

106
Chapter 4 Emulation Menu
IGP100 Compatbl.
This option instructs the IGP/PGL to behave similarly to the IGP-100 with
respect to certain commands. All new users with new applications should
select the Disable option. Selecting this mode insures the printer will behave
as described in this manual.
• Disable. The IGP does not emulate the IGP-100 mode.
• Enable. The IGP emulates the IGP-100 version.
Optimized Ratio
This option selects different bar code ratios for certain bar codes including
Code 39 and Interleaved 2 of 5. It is included for compatibility with the
IGP-X00 printers.
• Disable. Uses standard bar code ratios.
• Enable. Selects the alternate bar code ratios.
Error Report
Sets the error reporting capability for IGP/PGL forms.
• On. Full boundary error checking reported. Any element which falls off the
current page is reported as an error.
• Debug Mode. The printer is put in debug mode whenever a form is
defined in Create Form Mode. Each line of the Create Form is printed
along with an error if one occurred. This is the same functionality as if
there were a slash (/) entered before the Create Form Name.
• Fault. When an error occurs, the error is printed, and the message
IGP/PGL ERROR appears on the printer front panel. The printer then
stops printing and goes offline. The error must be cleared before the
printer can resume normal operation.
• Off. No form boundary checking. Graphic elements appear clipped if they
are beyond the page boundaries.