Printronix P5000LJ Series - Manual (Page 235)

RPRINTER/NPRINTER Setup (Netware 3.x, 4.x, and 5.x)
235
Setup using Forward Jobs to a Queue Mode
In this mode, an NDPS printer agent receives jobs from an NDPS client, then
forwards these jobs to an existing Netware queue. The Netware queue would
then be serviced by the NIC in some manner.
1. The P5000LJ printer must first be set up to service some Netware queue,
either by doing a PSERVER or RPRINTER mode setup from previous
chapters.
2. When setting up the NDPS printer agent, use the “Novell Printer
Gateway.”
3. For the “Novell PDS,” choose “((NONE).”
4. For the “Port Handler,” choose “Froward Jobs to a Queue,” then choose
the queue used in step 1 above, and note the Caution statement about
the Queue User Name.
5. For the “Select Printer Drivers” dialog, choose no driver unless you have
a driver into the Broker’s RMS which is to be used with the P5000LJ
printer.
Setup using LPR Mode
In this mode, an NDPS printer agent receives jobs from an NDPS client, then
forwards these jobs to a printer using the LPR protocol.
1. The NIC must first be set up with IP connectivity and be able to receive
jobs using the LPR protocol.
2. When setting up the NDPS printer agent, use the “Novell Printer
Gateway.”
3. For the “Novell PDS,” choose “((NONE)).”
4. For the “Port Handler,” choose “Remote (LPR on IP),” then enter the
hostname/ipaddress and printer name
(d1prn - d4prn by default) in the next dialog.
NOTE: When the IPDS feature is installed, queue name d4prn is not
available.
5. For the “Select Printer Drivers” dialog, choose no driver unless you have
a driver installed into the Broker’s RMS which is to be used with the
P5000LJ printer.
Setup Using RPRINTER Mode
In this mode, an NDPS printer agent receives jobs from an NDPS client, then
forwards these jobs to a printer using the RPRINTER IPX protocol.
1. The NIC must first be set up to function in RPRINTER mode, choosing
any desired Print Server Name and Printer Number.
2. When setting up the NDPS printer agent, use the “Novell Printer
Gateway.”
3. For the “Novell PDS,” choose “((NONE)).”
4. For the “Port Handler,” choose “Remote (rprinter on IPX).”