Printronix P5000LJ Series - Manual (Page 295)

295
E
NERGY
S
TAR®
P5000LJ printers comply with the requirements of the E NERGY S TAR®
Office Equipment Program of the U.S. Environmental Protection Agency.
When in the reduced power state, the printer displays “Power Saver Mode,”
and is activated at the control panel.
Electrical Characteristics
1
Printing, Typical = 120 VAC, 50/60 Hz, Shift Recycle (ASCII Swirl), High
Speed Mode
2
Printing, Maximum = 120 VAC, 50/60 Hz, All Black, High Speed Mode
3
Non-Printing = 120 VAC, 50/60 Hz, Standby Mode
Current
LJ500P LJ500Q LJ1000Q
LJ1500Q
LJ1500QS
LJ1500P
Printing, Typical
1 2.15A 2.43A 3.28A 4.37A 3.72A
Printing, Maximum
2 3.60A 3.05A 4.39A 6.06A 5.19A
Non-Printing
3 0.90A 1.17A 1.19A 1.16A 1.10A
Power
Printing, Typical
1 190W 191W 271W 364W 310W
Printing, Maximum
2 320W 244W 380W 514W 440W
Non-Printing
3 90W 84W 86W 84W 80W
Heat
Printing, Typical
1 648 BTU/hr 652 BTU/hr 925 BTU/hr 1342 BTU/hr 1058BTU/hr
Printing, Maximum
2 1092 BTU/hr 833 BTU/hr 1297 BTU/hr 1754 BTU/hr 1502BTU/hr
Non-Printing
3 307 BTU/hr 287 BTU/hr 294 BTU/hr 287 BTU/hr 273BTU/hr