Printronix P5000LJ Series - Manual (Page 151)

Parallel Port (PRN)
151
If disabled, the message will contain additional information including the
device name and location, alert description, alert group, and alert severity
level, and printer status.
Default: Disabled
• Short E-mail Message Length - Specifies the maximum size of the short
e-mail message. Acceptable values are 15 to 80 characters.
Default: 80 characters
• Send Test Message - Provides a way to test the validity of the e-mail
address/SMTP server address. If checked, a test message will be sent to
the specified e-mail address when the submit button is pressed.
Default: All alert groups are disabled by default.
If the alert message is to be sent to a cellular phone or pager, the Short E-mail
Format option should be enabled. Once this option is enabled, you may
specify the maximum e-mail message length (15-80 characters). When
enabled, the message will contain the alert description, the severity level, and
device name (unless the length of the message exceeds the Short E-mail
Message Length, in which case the message will be truncated).
If the Short E-mail format is disabled, the message will contain additional
information including the device name and location, alert description, alert
group, alert severity level, and printer status.
To test the validity of the e-mail address and the SMTP server address,
enable the Send Test Message option. If the Send Test Message box is
checked, a test message will be sent to the specified e-mail address when the
submit button is pressed.
Alert Groups
Specifies which alert groups are enabled for reporting for this configuration.
When an alert occurs that is contained in one of the enabled alert groups, it
will be posted to the specified SNMP manager, Unix syslog daemon, and/or
e-mail address. The following table describes which printer events belongs to
which Alert Group.
Default: All alert groups are disabled by default.