Paradyne 9128-II - Manual (Page 42)

3. Configuration
3-8 April 2002 9128-A2-GB20-60
Using the Easy Install Feature
The Easy Install feature provides a straight-forward installation menu that requires
minimal configuration to get the FrameSaver unit up and running quickly, and to set
up remote configuration and management via Telnet access from the NOC
(Network Operations Center).
Main Menu
→
Easy Install
Easy Install Screen Example *
* Service Type applies to the Model 9128-II. The Ethernet Port Options Screen applies
to the 9126-A2 and 9128-II. For the Model 9126 or 9128, DS0 Base Rate (Kbps)
appears after the Network 1 Line Coding Format option.
To remotely access the FrameSaver unit in Frame Relay mode, use the Dedicated
Network Management Link that was created during installation, using the Node IP
Address that was entered for the unit.
See the FrameSaver SLV 9126 1-Slot Unit Installation Instructions , the
FrameSaver SLV 9128/9128-II 1-Slot Unit Installation Instructions , or the
FrameSaver SLV 9128/9128-II Network Access Module (NAM) Installation
Instructions
for additional information and installation procedures.
main/easy_install 9128-II
Device Name: Node A 5/26/2000 23:32
EASY INSTALL
Service Type: Frame Relay
Node IP Address: 000.000.000.000 Clear
Node Subnet Mask: 000.000.000.000 Clear
TS Access: DLCI 980
Create a Dedicated Network Management Link
Ethernet Port Options Screen
Time Slot Assignment Screen
Network 1 Line Framing Format: ESF
Network 1 Line Build Out (LBO): 0.0
Network 1 Line Coding Format: B8ZS
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save