Paradyne 9128-II - Manual (Page 163)

5. Operation and Maintenance
9128-A2-GB20-60 April 2002 5-7
FrameSaver SLV 9128/9128-II LEDs and Control Leads
The FrameSaver SLV 9128 faceplate includes 12 LEDs (light-emitting diodes) that
provide status on the FrameSaver unit, its network interface, DSX/PRI, and DTE
interface. The faceplate below is for the Model 9128, without an Ethernet port.
The FrameSaver SLV 9128-II, with an Ethernet port, faceplate is shown below.
To access the Display LEDs and Control Leads screen:
Main Menu
→
Status
→
Display LEDs and Control Leads
The following example shows the screen for a FrameSaver SLV 9128-II with an
ISDN PRI DBM installed. FR Mode only appears for a FrameSaver SLV 9128-II.
Display LEDs & Control Leads Screen for a FrameSaver SLV 9128-II
Refresh the screen to view control lead transitions. LED and control lead
descriptions are in the sections that follow.
2-OK OK ALM TST BKP SIG OOF ALM SIG OOF ALM 1-OK
9128
NETWORK DSX/PRI PORT
FrameSaver TM SLV FrameSaver ® SLV
00-16180-01
00-16833
FrameSaver TM SLV FrameSaver ® SLV
OK OK ALM TST BKP FR SIG OOF ALM SIG OOF ALM
9128
NETWORK DSX/PRI PORT
main/status/leds 9128-II
Device Name: Node A 5/26/2000 23:32
DISPLAY LEDS & Control Leads
T1 FR NAM
GENERAL NETWORK 1 DSX-1 Port-1 Port-2
OK Sig Sig OK OK
Alarm OOF OOF TXD TXD
Test Alm Alm RXD RXD
Backup LMI OK DTR DTR
FR Mode RTS RTS
ISDN PRI
Sig
OOF
Alm
--------------------------------------------------------------------------------
ESC for previous menu MainMenu Exit
Refresh