Paradyne 9128-II - Manual (Page 11)

9128-A2-GB20-60 April 2002 ix
About This Guide
Purpose and Intended Audience
This document contains information needed to properly set up, configure, and
verify operation of the FrameSaver SLV (Service Level Verifier) 9126, 9128, or
9128-II running firmware release 2.0 or above. It is intended for system designers,
engineers, administrators, and operators.
You must be familiar with the functional operation of digital data communications
equipment and frame relay networks.
Document Organization
Section Description
Chapter 1, About the FrameSaver
SLV
Identifies how the FrameSaver SLV 9126 and
9128/9128-II fit into Paradyne’s Service Level
Management (SLM) solution, and describes its
features.
Chapter 2, User Interface and
Basic Operation
Shows how to navigate the menu-driven user
interface.
Chapter 3, Configuration Provides configuration information for the
FrameSaver SLV 9126 and 9128/9128-II.
Chapter 4, Security and Logins Provides procedures for controlling access to the
FrameSaver SLV and setting up logins.
Chapter 5, Operation and
Maintenance
Provides procedures to display unit identification
information and perform file transfers, as well as how
to display and interpret status and statistical
information.
Chapter 6, Troubleshooting Provides device problem resolution, alarm, and other
information, as well as troubleshooting and test
procedures.
Chapter 7, Setting Up OpenLane
for FrameSaver Devices and
Activating SLM Features
Identifies where installation and setup information is
located and how FrameSaver units are supported.