Paradyne 9128-II - Manual (Page 280)

7. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
7-4 April 2002 9128-A2-GB20-60
Ordering SLM Feature Set Activations
When advanced SLM functionality is needed at a site, an Activation Certificate
(Feature No.9126-C1-220 or 9128-C1-220) can be ordered, which will allow you to
activate SLM features in FrameSaver devices with the diagnostic feature set. You
must have the OpenLane SLM system, Release 5.3 or later, to activate SLM
capability in FrameSaver devices and to manage your certificates.
NOTE:
If you have a combination of models in your network, a separate Activation
Certificate must be ordered for each model number. Each certificate can be
ordered for a single unit or for many units.
Contact one of the following to request an Activation Certificate:
T If you are an end user and managing your own network, contact your sales
representative or distributor.
T If your network service provider (NSP) manages the network, contact the
service provider.
T If you are a network service provider or distributor, contact Paradyne at
1-800-727-2396, www.paradyne.com, via a purchase order, or your
Electronic Data Interchange (EDI). If submitting a purchase order by fax, send
it to 1-727-532-5270.
An Activation Certificate can also be ordered through the Paradyne store at
www.paradyne.com/store.
Provide the following information:
T Model (9126 or 9128)
T Number of units to be activated
T Your OpenLane SLM system license key number
To Find Your License Key Number
Your license key number was entered into your system when your OpenLane SLM
system was installed and is available from the OpenLane Administration screen.
However, to access the screen with your license key number, you must log in as a
user with Administrative system access.
Procedure
To find your OpenLane license key number:
1. Open the OpenLane SLM application and log in as a user with Administrative
access (e.g., ADMIN).
2. A bottom of the OpenLane Administration screen, select About OpenLane
SLM .
The license key is shown mid-screen, below the copyright and build
information.