Configuration option areas – Paradyne 9128-II User Manual
Page 38
3. Configuration
3-4
April
2002
9128-A2-GB20-60
Configuration Option Areas
The FrameSaver unit arrives with configured factory default settings, which are
located in the Factory Default Configuration option area. You can find the default
settings for configuration options in the:
T
FrameSaver SLV 9126 Quick Reference
or
FrameSaver SLV 9128/9128-II Quick Reference
T
If the factory default settings do not support your network’s configuration, you can
customize the configuration options to better suit your application.
Four configuration option storage areas are available.
Configuration Option Area
Description
Current Configuration
The currently active set of configuration options.
Customer Configuration
An alternate set of configuration options that you can set
up and store for future use.
Scratchpad Configuration
An alternate configuration area for temporary use. The
Scratchpad configuration is reset to the factory default
settings when the unit is powered off and on.
Default Factory Configuration
A read-only configuration area containing the factory
default set of configuration options.
You can load and edit default factory configuration
settings, but you can save changes only to the Current,
Customer, or Scratchpad configuration option areas.