Paradyne 9128-II - Manual (Page 360)

C. Connectors, Cables, and Pin Assignments
C-4 April 2002 9128-A2-GB20-60
COM Port Connector
The following table provides the pin assignments for the 1-slot FrameSaver
SLV 9128 and 9126 unit’s 25-position EIA-232C communication port connector.
The following table shows the signals and pin assignments for the carrier-
mounted FrameSaver SLV 9128 NAM’s 8-position communication port
interface/connector.
Signal Direction Pin #
Shield (GND) — 1
DCE Transmit Data (TXD) From DTE ( In ) 2
DCE Receive Data ( RXD) To DTE ( Out) 3
DCE Request to Send ( RTS) From DTE ( In ) 4
DCE Clear to Send (CTS) To DTE (Out ) 5 *
DCE Data Set Ready (DSR) From DTE ( In ) 6*
Signal Ground ( SG) — 7
DCE Carrier Detect ( CD) To DTE ( Out) 8*
DCE Data Terminal Ready (DTR) From DTE ( In ) 20
* Pins 5, 6, and 8 are tied together.
Signal Direction Pin #
DCE Received Data ( RXD) From DCE (Out ) 2
Signal Ground ( SG) To/From DCE 3
DCE Transmit Data (TXD) To DCE ( In ) 4
DCE Data Terminal Ready (DTR) To DCE ( In ) 5
DCE Carrier Detect ( CD) From DCE (Out ) 6
DCE Request to Send ( RTS) To DCE ( In ) 7