Paradyne 9128-II - Manual (Page 182)

5. Operation and Maintenance
5-26 April 2002 9128-A2-GB20-60
Two Level-1 Users Accessing
Device Two Level 1 users are already using the menu-
driven user interface; only two sessions can be active
at one time.
Test Call Active, ISDN Link Name A test call is active on the specified frame relay link,
the link being the ISDN Link Name assigned in the
ISDN Link Profile.
This message would only appear for models with the
built-in DBM.
Yellow at DSX-1 A yellow alarm signal is received on the DSX-1
interface. DTE has detected a LOS or OOF
condition.
Yellow at ISDN PRI (Active/Idle)
(ISDN PRI DBM only)
A yellow alarm signal is received on the ISDN
network interface.
T Active – Backup call was in progress.
T Idle – DBM was in Idle mode.
Indicates a possible cable problem.
Yellow at Network 1 A yellow alarm signal is received on the network
interface. Possible reasons include:
T Network cable problem.
T T1 facility problem.
Table 5-7. Health and Status Messages (7 of 7)
Message What It Indicates
1 nnnn indicates a DLCI number of 16 through 1007.
2
frame relay link is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-
n . The frame relay link associated with the user data port.
– ISDN Link Name on a non-network ISDN DBM interface.
3
Does not apply to a TS Management Link DLCI.