Paradyne 9128-II - Manual (Page 339)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-60 April 2002 B-17
Trap: dialControl
These traps indicate when an ISDN backup call is initiated or terminated, or when
an outgoing call is rejected by the far end device.
Table B-9. dialControl Traps (1 of 2)
Trap Variable-Bindings Possible Cause
Standard Dial Control MIB
dialCtlPeerCall-
Information T callHistoryPeerId
(RFC 2128)
T callHistoryPeerIfIndex
(RFC 2128)
T callHistoryLogicalIfIndex
(RFC 2128)
T ifOperStatus (RFC 1573)
T callHistoryPeerAddress
(RFC 2128)
T callHistorySubAddress
(RFC 2128)
T callHistoryDisconnect-
Cause (RFC 2128)
T callHistoryConnectTime
(RFC 2128)
T callHistoryDisconnect-
Time (RFC 2128)
T callHistoryInfoType
(RFC 2128)
T callHistoryCallOrigin
(RFC 2128)
A peer-to-peer call has been
ended.
String:
‘Call sequence on $ifString [using
B-Chnl $channel] terminated due
to $causeString.’
The B-channel in this example is
only provided if it is known.
See Most Recent and Previous
Cause Values,
Table 5-12, DBM
Interface Status, in Chapter 5,
Operation and Maintenance , for a
list of the $causeStrings and their
cause numbers.
dialCtlPeerCall-
Setup T callActivePeerId
(RFC 2128)
T callActivePeerIfIndex
(RFC 2128)
T callActiveLogicalIfIndex
(RFC 2128)
T ifOperStatus (RFC 1573)
T callActivePeerAddress
(RFC 2128)
T callActiveSubAddress
(RFC 2128)
T callActiveInfoType
(RFC 2128)
T callActiveCallOrigin
(RFC 2128)
A peer-to-peer call has been sent
or received.
String:
‘Call sequence on $ifString [using
B-Chnl $channel] initiated
[remotely/locally] .’
The B-channel in this example is
only provided if it is known.