Paradyne 9128-II - Manual (Page 26)

2. User Interface and Basic Operation
2-2 April 2002 9128-A2-GB20-60
Logging On
Start a session using one of the following methods:
T Telnet session via:
— An in-band management channel through the frame relay network.
— A local in-band management channel configured on the DTE port between
the FrameSaver unit and the router.
T Dial-in connection using the internal modem.
T Direct terminal connection over the COM port.
When logging on, the User Interface Idle screen appears.
T If no security was set up or security was disabled, the Main Menu screen
appears (see
Main Menu on page 2-4). You can begin your session.
T If security was set up and is enabled, you are prompted for a login. Enter your
login ID and password.
When the user interface has been idle, a session is automatically ended and the
screen goes blank when the unit times out. Press Enter to reactivate the interface.
Procedure
To log in when security is being enforced:
1. Type your assigned Login ID and press Enter.
2. Type your Password and press Enter.
— Valid characters – All printable ASCII characters
— Number of characters – Up to 10 characters can be entered in the Login
ID and Password fields
— Case-sensitive – Yes
An asterisk (* ) appears in the password field for each character entered.