Paradyne 9128-II - Manual (Page 40)

3. Configuration
3-6 April 2002 9128-A2-GB20-60
Changing Configuration Options
Procedure
To change configuration option settings:
1. From the Configuration Edit/Display menu, select a set of configuration
options and press Enter.
For example:
Configuration
→
PVC Connections
2. Select the configuration options that are applicable to your network, and make
appropriate changes to the setting(s). See Chapter 2, User Interface and
Basic Operation , for additional information.
When creating new PVC connections or management PVCs, some
configuration options will be blank. For a valid setting to appear, Tab to the
configuration option and press the spacebar.
3. Repeat Steps 1 and 2 until all changes are complete.
NOTES:
— Only Security Access Level 1 users can change configuration options.
— Security Access Level 2 users can only view configuration options and run
tests.
— Security Access Level 3 users can only view configuration options; they
cannot change configuration options or run tests.