Paradyne 9128-II - Manual (Page 169)

5. Operation and Maintenance
9128-A2-GB20-60 April 2002 5-13
Duplicate DLCI
Number DLCI number entered is not
unique for the frame relay
link. No action needed; previous
contents of the DLCI number field
is restored.
File Transfer Complete
(Seen at an FTP
terminal.)
A file transfer was
performed successfully. Switch to the newly downloaded
software.
See Changing Software on
page 5-78.
File Transfer Failed –
Invalid file
(Seen at an FTP
terminal.)
A file transfer was
attempted, but it was not
successful. T Try again, making sure you
type the filename correctly.
T Exit the FTP session, or
download another file.
See Changing Software on
page 5-78.
Invalid – Already
Active A test was already in
progress when it was
selected. No action needed.
Invalid Character ( x ) A non-valid printable ASCII
character has been
entered. Reenter information using valid
characters.
Invalid date: must be
mm/dd/yyyy A non-valid date was
entered on the System
Information screen. Reenter the date in the
month/day/4-digit year format.
Invalid date and/or
time A non-valid date or time
was entered on the System
Information screen. The
date does not exist (e.g.,
February 30th). Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Invalid – Link Already
Active Start was selected for a Test
Call, but the selected frame
relay link is currently in use. Wait until the link is available and
try again.
Invalid – No ISDN
Channels Available Start was selected for a Test
Call, but all supported ISDN
channels are currently in
use. Wait until a channel is available
and try again.
Invalid – No Test Call
Active Stop was selected for a Test
Call and no test call is
active on the selected link.
This can occur when the
test is ended because the
link is needed for an active
connection, but the PVC
Test screen has not yet
been updated to Start. Start the Test Call again when the
connection is Inactive again.
Invalid time: must be
hh:mm:ss A non-valid system time
was entered on the System
Information screen. Reenter the time in the
hour:minutes:seconds format.
Table 5-5. Device Messages (2 of 6)
Message What It Indicates What To Do