Paradyne 9128-II - Manual (Page 184)

5. Operation and Maintenance
5-28 April 2002 9128-A2-GB20-60
Monitor Pttn Active, Interface
2
A Monitor Pattern test is active on the specified
interface.
This test cannot be activated on user data ports that
have Port Use set to Frame Relay.
Network Initiated ISDN BRI Test
Active An ISDN test has been started by the ISDN BRI
network and it is currently active.
Send Pttn Active, DLCI nnnn ,
frame_relay_link
1 ,3
A selected Send Pattern test is active on the
specified DLCI for the specified frame relay link.
Monitor Pttn Active, DLCI nnnn ,
frame_relay_link
1 ,3
A selected Monitor Pattern test is active on the
specified DLCI for the specified frame relay link.
Test Call Active, ISDN Link Name A test call is active on the specified frame relay link,
the link being the ISDN Link Name assigned in the
ISDN Link Profile.
This message would only appear for units with the
ISDN DBM feature.
Table 5-8. Test Status Messages (2 of 2)
Message What It Indicates
1 frame relay link is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port- n for a 1-slot unit, or S s Port- n for a NAM in a multislot housing (the frame relay
link associated with the specified user data port in the specified slot).
– ISDN Link Name on a non-network ISDN DBM interface.
2
Interface is one of the following:
– Network 1
– DSX-1
– Port- n
– ISDN, BRI or PRI
3
nnnn indicates a DLCI number of 16 through 1007.