Paradyne CSU - Manual (Page 418)

D. Router Command Line Summaries and Shortcuts
D-2 September 2002 9128-A2-GB20-80
Show Command Summary
Table D-1, Show Commands , lists all of the show, or display, commands for the
CLI.
Table D-1. Show Commands
Command Function
s how a rp Displays all the devices in the router’s ARP
table.
s how b ridge Displays the router’s bridge forwarding
database entries.
s how c onfiguration Displays the router’s current configuration.
s how c onfiguration { s aved | u nsaved } Shows the current configuration, either saved in
memory or entered during the current session.
s how f rame-relay m ap Shows the status of all frame relay DLCIs on
the router’s frame relay interface.
s how in terface
[ intf-type intf-num [ .sub-intf-num ] ]
Shows the status of the specified interface,
sub-interface, or all interfaces and
sub-interfaces for the router.
s how ip d hcp b inding [ ip-address ] Shows the address bindings associated with
the DHCP server.
T If an IP address is specified, only bindings
for that client will be displayed.
T If no IP address is specified, all DHCP
server bindings are displayed.
s how ip n at t ranslations Displays all the address bindings associated
with the DHCP server.
s how ip r oute [ ip-address ] Shows the Routing Table entry for the device
with the specified IP address, or all Routing
Table entries if no IP address is specified.
s how ip t raffic Shows IP statistics for the router.
s how s panning-tree Displays the router’s spanning-tree topology.