Paradyne CSU - Manual (Page 19)

1. About the FrameSaver SLV
9128-A2-GB20-80 September 2002 1-3
T CLI Access and Configuration. Provides a router Command Line Interface
(CLI), along with the menu-driven user interface, for configuring and managing
the router. It is accessed from the Main Menu via a direct COM port
connection or Telnet.
The following features are configurable using the CLI:
— NAT (Network Address Translation) support provides the means to bind IP
addresses in a private network to addresses in a public, or global, network
for transparent routing between the two domains on all PVCs. Up to 30
NAT pools are supported.
— Routing table configuration permits configuration of static routes. Up to
32 entries can be made.
— IP forwarding to forward multicast IP packets and customer datagrams.
— Filtering on the Ethernet and frame relay interfaces, configurable from the
CLI access list, allows the router to filter MAC frames and prevent
unwanted inbound connections. Two filter access lists are supported per
interface, one for the transmit and one for the receive direction.
The following protocol is supported:
— DHCP (Dynamic Host Configuration Protocol) support for dynamic
allocation of IP addresses and automatic cleanup when a subinterface is
deleted, as well as allowing multiple IP address ranges for DHCP deny
capability. The DHCP server and relay cannot be enabled at the same
time. Up to 253 DHCP clients can be supported. One DHCP pool of
addresses, and one IP address range per pool is supported.