Paradyne CSU - Manual (Page 212)

7. Operation and Maintenance
7-30 September 2002 9128-A2-GB20-80
Table 7-10. Network LMI-Reported DLCIs Status
Field Status What It Indicates
DLCI 16 through 1007 Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface – the
identifying number assigned to the path
between two frame relay FrameSaver
units’ ports.
DLCI statuses are listed in ascending
order ( i.e., lowest number first).
Status
Active
Inactive
Deleted
1
New
1
LMI-reported status of the DLCI:
T Whether the DLCI is active (capable of
carrying data) in the frame relay
network,
T Whether it is inactive in the frame relay
network,
T Whether it has been deleted by the
frame relay network, or
T Whether it has been created by the
frame relay network.
CIR (bps) 0 – 1536000 Displays the committed information rate
reported by the Stratacom switch. CIR
information only appears in this column
when LMI Protocol is set to Standard.
If blank, the switch does not support this
feature.
1
Appears for 10 seconds only, before the network changes Deleted to Inactive
and New to Active .