E. connectors, cables, and pin assignments, Rear panels, E connectors, cables, and pin assignments – Paradyne CSU User Manual
Page 423: Appendix e, Connectors, cables, And pin assignments, Connectors, cables, and pin assignments
9128-A2-GB20-80
September 2002
E-1
E
Connectors, Cables, and Pin
Assignments
This appendix shows the FrameSaver unit rear panels, and pin assignments for
the connectors/interfaces and cables. Standard interfaces are used on the unit, so
most cables do not have to be specially ordered; they can be purchased
anywhere.
NOTE:
In the pin assignment tables of this appendix, if the pin number is not shown, it
is not being used.
Rear Panels
The following illustration shows the rear panel of the FrameSaver SLV 9126
(without Ethernet).
The following illustration shows the rear panel of the FrameSaver SLV 9126-II (with
Ethernet) and the 9126-II Router.
98-16154
POWER
COM
DBM
DSX-1
MDM
NET
DSX
02-17141a
POWER
COM
DSX-1
MDM
NET
DSX
ENET