Paradyne CSU - Manual (Page 215)

7. Operation and Maintenance
9128-A2-GB20-80 September 2002 7-33
PVC Connection Status
PVC connection statuses are selected from the Status menu.
Main Menu
→
Status
→
PVC Connection Status
The PVC Connection Status screen shows all PVC connections and management
links configured for the unit. The source and primary destination are shown, along
with an alternate destination for backup. When a primary destination DLCI was
assigned to a Backup Group, the Backup Group designation appears next to the
DLCI number. In the example below, DLCIs 502 and 504 had been assigned to
Backup Group A.
PVC Connection Status Screen Example
For units with ISDN backup capability, the DBM provides backup support through
the unit’s ISDN DBM interface. For units without ISDN backup capability, an
alternate network DLCI can be used to backup user data. For additional
information about the Alternate Destination fields, see
Configuring PVC
Connections in Chapter 4, Configuration Options.
If the No PVC Connections message appears instead of a list of PVC
connections, no PVC connections have been configured yet.
main/status/connections 9128-II
Device Name: Node A 5/13/2001 23:32
Page 1 of 2
PVC CONNECTION STATUS
Source Primary Destination Alternate Destination
Link DLCI EDLCI Link DLCI EDLCI Status Link DLCI EDLCI Status
Port-1 201 Net1-FR1 300 PM Active
Port-2 202 Net1-FR1 1001 1 Active
Port-1 100 Net1-FR1 1001 4 Active
Port-2 204 Net1-FR1 1001 2 Active
Mgmt PVC Tampa Net1-FR1 1001 5 Active
Port-2 206 Net1-FR1 1001 3 Active
Port-1 207 Net1-FR1 1001 Active
Port-1 208 Net1-FR1 502A Active Colorado 400 Inactive
Port-1 209 Net1-FR1 504A Inactive Colorado 302 Active
Port-1 210 Net1-FR1 505 Inactive Tampa 304 Active
Port-1 214 Net1-FR1 506 Active
--------------------------------------------------------------------------------
ESC for previous menu MainMenu Exit
Refresh PgUp PgDn